Not all gravel drains the same. The key variable is fines — the small particles and dust mixed in with the larger stones. Fines clog drainage over time, turning a functional drainage bed into a waterlogged mess within a few seasons. That's why you can't just use any crushed stone for drainage work.

Here's what works, what doesn't, and why it matters for each specific application.

Why "clean" stone matters

When suppliers say "clean" gravel, they mean it has been washed to remove fines — the fine particles under 1/4" that would otherwise fill void spaces between stones. Void space is what makes gravel drain. More voids = more drainage capacity.

#57 clean stone has a void ratio of roughly 40% when loosely placed. Fines-heavy material like #411 (used for driveways) compresses that void ratio down to 25–30% or less. For a driveway, that's fine — you want it firm. For drainage, it's a problem.

The quick rule: If it needs to drain, use clean #57. If it needs to be driven on, use #411. Don't swap them.

Best gravel for each drainage application

French Drain
✓ Clean #57 Crushed Stone (3/4")

Wrap perforated pipe in filter fabric, surround with #57 stone, backfill with more #57. The clean stone won't clog the pipe perforations.

Dry Well / Seepage Pit
✓ Clean #57 or #2 Stone (1.5")

Larger stones around the perforated dry well barrel increase void space and water storage. Clean is essential — fines would fill the well over time.

Foundation Drain / Around Footings
✓ Clean #57 Crushed Stone

Surrounds perimeter drain tile to carry water away from the foundation. Must be clean — any fines near the footing will eventually migrate into the drain pipe.

Downspout Discharge Bed
✓ Pea Gravel or Clean #57

Disperses concentrated roof runoff from downspout extensions. Pea gravel looks cleaner decoratively; #57 handles more volume.

Swale / Surface Channel
River Rock (2"–4") or Rip Rap

Larger stone resists erosion from surface water velocity. Clean stone again — you're relying on the void space for infiltration.

Under Concrete Slab
Clean #57 (4" compacted layer)

Acts as a capillary break to stop moisture wicking up through the slab. Must be clean stone — fines defeat the purpose.

Dry Creek Bed
River Rock (1"–3" mixed sizes)

Decorative drainage channel. Larger rounded stones look natural and handle storm water flow without washing away.

Permeable Patio / Driveway Base
#57 or Angular Crushed Stone

The aggregate base layer for permeable pavement must drain freely. Clean #57 under PICP pavers is standard practice.

Stone size guide for drainage

Stone SizeNameDrainage RateBest Use
3/8"#8 Pea GravelGoodDecorative beds, downspout discharge
3/4"#57 StoneExcellent ⭐French drains, foundation drains, under slabs
1.5"#2 StoneExcellentDry wells, large drainage beds, high-volume areas
2"–4"River Rock / CobbleVery goodSwales, dry creek beds, channel lining
4"–8"Rip RapGoodErosion control, outfall protection

What NOT to use for drainage

Always use filter fabric. For any drainage installation — French drains especially — wrap the stone-filled trench in woven geotextile filter fabric. It lets water pass through while keeping fine soil particles from migrating into the drainage stone over time. A French drain without filter fabric typically fails within 5–10 years as soil fines clog the void spaces.

How much drainage stone do you need?

For a French drain, the standard trench is 6–12 inches wide and deep enough to install pipe below the problem area (typically 18–24" deep for yard drainage, 4–6 ft deep for foundation drainage). Fill the trench with clean #57 stone around and over the pipe, to within 6" of the surface. Use the calculator — enter trench length × width × depth to get your cubic yards and tonnage.

A 50-foot French drain in a 12"-wide × 18"-deep trench needs roughly 2.8 cubic yards (about 4 tons) of clean stone. Add the 10% overage buffer and order 4.4–4.5 tons.

To compare prices from local suppliers on clean #57 stone, Aggregate Markets lets you see delivery quotes by zip code before you commit to a price.